Games, Software

Linux Air Combat – flight simulator running on the Raspberry Pi 4

by  •  • 0 Comments

Linux Air Combat looks like a great flight simulator, but it has previously struggled to be installed and run on the Raspberry Pi. Lack of processor speed and memory has meant that the Pi hasn’t quite been up to the challenge. Now, great news from B Bosen who has reported on the Raspberry Pi Forums that LAC works on the 4GB Raspberry Pi 4. You can watch a video of the simulator in action below:

If you’d like to install it and have a go yourself, you can find out how to do it on the video below:

An installer for the Pi 4 is available here and you can find out tonnes of information about the software on the author’s website.

It sounds, according to this page, that you might run into dependency issues, so feel free to comment below as to what you’ve experienced and how you’ve solved them (if you did!)

Big thanks to Simon Walters on Twitter for spotting this on the forums!

Artificial intelligence, Making, Research, Wearable

3D hand-sensing wristband uses a Raspberry Pi for machine learning

by  •  • 0 Comments

Researchers from Cornell and the University of Wisconsin, Madison, have designed a wrist-mounted device that tracks the entire human hand in 3D. The device (pictured) uses the contours from the wearer’s wrist to create an abstraction of 20 finger joint positions. The FingerTrak bracelet uses low-resolution thermal cameras that read the wrist contours and a tethered Raspberry Pi 4 and machine learning to teach itself what the hand is doing based on these readings.

Cheng Zhang, assistant professor of information science and director of Cornell’s new SciFi Lab, where FingerTrak was developed said:

“The most novel technical finding in this work is discovering that the contours of the wrist are enough to accurately predict the entire hand posture,” Zhang said. “This finding allows the reposition of the sensing system to the wrist, which is more practical for usability.”

You can purchase the paper written by the team here (there is some supplemental material available for free). VentureBeat have covered the story here and the Cornell Chronicle covered it here. You can view a video about the project below:

3D printing, Accessories, Camera module, Making

Raspberry Pi high-definition camera – a collection of new projects, guides and reviews from the web

by  •  • 0 Comments

At the end of April, a new, high-definition camera was launched for the Raspberry Pi. Now that people have had the kit for a few months, a lot of projects are starting to come out that really show off the camera. I thought I’d do a round-up post.

Bare-bones rig

David Booth wrote an excellent guest post on this very blog with his bare-bones high-quality camera rig. You can read the whole piece here.

Pistol Grip camera

Jenny List has written an interesting piece on camera form-factors over on Hackaday. She’s talked about some interesting designs and shapes for cameras and then developed her own one with a pistol grip (as pictured) which uses the high-definition camera. It’s an interesting demand and, as she points out, is reminiscent of 8mm cine cameras. All the CAD files are over on GitHub for this one.

3D camera using two modules

In a recent MagPI magazine article, PJ Evans wrote about how he’d taken two Raspberry Pi Zeros and attached a pair of high-quality cameras. Using a 3D-printed mount, he’d managed to arrange the two devices so that they were at the right angle to get a good, solid, high quality 3D image which was then displayed using a smartphone and Google Cardboard. One Zero is used as the master to trigger the two cameras and provide a web interface and a clever bit of GPIO bridge-wiring means that only one power supply is necessary. You can see the whole project over on the MagPi website.

3D-printed enclosure

Pierre-yves Baloche has written a fascinating series of posts in which he details the usage of the Pi camera and then the creation of a 3D-printed enclosure to hold the high-quality camera. Code and 3D design files for the project are available on GitHub.

Microscopic

Recently, Pimoroni announced the availability of a microscopic lens and stand for the high-definition camera. Currently, they are both out-of-stock but Les Pounder, over at Tom’s Hardware managed to get one. He’s written an extensive review of the kit over on that site which you can read here.

 

That’s it for this roundup. Hopefully at least one of those articles will be of interest 🙂

Cases, Crowdfunding, DSI display

New case for the Raspberry Pi and touchscreen on Kickstarter from SmartiPi

by  •  • 0 Comments

Tom Murray, an experienced Kickstarter campaign creator, and his company SmartiPi are back in the case game with a new Kickstarter campaign. This time, they’ve developed a new case for the Raspberry Pi and official touchscreen. Compatible with all 40-pin Pis, the case comes in two sizes (the choice is made after the campaign) and is called the SmartiPi Touch Pro.

The case comes with inserts to cover the USB/Ethernet port and also the in-built camera hole which is brought around the front. It also comes with two fans to ventilate the case which is expected to be made in injection moulded ABS plastic.

For a single case, you’re looking at $28 plus shipping (which is only $6 to the UK and free for USA, just for reference) and the costs come down slightly for multiples.

It looks like a great case, especially for those who want a static display. The extra space afforded by the new design means you could add a HAT to increase the functionality and Tom has run several excellent campaigns which have delivered. So, take a look at the Kickstarter campaign which runs to the 15th June.

Crowdfunding

New laptop learning system from Elecrow – CrowPi2 – on Kickstarter now! Powered by Raspberry Pi

by  •  • 2 Comments

Launched today on Kickstarter is the CrowPi2. Billed as an “All in one STEAM education platform & Raspberry Pi laptop to Learn, Explore and Have Fun”, the CrowPi includes an 11.6″ 1920×1080 resolution IPS screen and a removable unit which includes a wireless keyboard and trackpad. (They also include a wireless mouse, but I’m not sure why if they’ve got the trackpad, but anyway…)

TL;DR – Take me to the Kickstarter.

Beneath this removable unit is a whole host of sensors, widgets and blinkies to do projects with.

Included in the main body of the CrowPi is a 2MP camera and a microphone (very handy) as well as stereo speakers. The Raspberry Pi is installed upside down in the base of the CrowPi, plugged into the unit using the 40-pins of the GPIO.

A big headline of the CrowPi 2 is that it is compatible with both the Raspberry Pi 3 and Raspberry Pi 4, which means you can use whichever Pi you happen to have spare. The kit comes with HDMI adapters for both.

According to the promotional page, the CrowPi2 comes with over 70 lessons covering Scratch, Python, AI and Minecraft. There are also an additional 30+ projects and Python games to explore the Raspberry Pi. There is also offline account management to help you to save progress and achievements.

Price-wise, the CrowPi 2 is pretty competitive, considering what you get. There are three kits: Basic (starting at $139 for super earlybird, rising to $169 for earlybird and then to $259 for retail), Intermediate ($239/$259/$359) and Advanced ($289/$329/$439). Each one comes with more bits and pieces than the last, and the Intermediate and Advanced include a Raspberry Pi 4 4GB. All these prices are subject to change ahead of the Kickstarter campaign, which should be launching tomorrow.

For more information, and to sign-up to the notification email list, visit this page on the Elecrow site. Visit the Kickstarter here.

Camera module, Environment, Making, Video

Raspberry Pi treats people urinating illegally in public to a deluge from a water pipe (nothing visible, but still…)

by  •  • 2 Comments

Following the arrest and conviction of Andrew Banks for urinating at the Westminster memorial dedicated to PC Keith Palmer, someone sent me a video of this fabulous Raspberry Pi-controlled project. The charmingly-named “That Engineer Guy” has been helping a Southampton-based friend out. The friend owns a shop and, disgustingly, people (I assume mostly drunk) have been using his back doorway as a public urinal. By using a Raspberry Pi, a water valve and a camera programmed to detect movement, The Engineer Guy has developed a solution by creating a spray of his own – from a water down-pipe! The lesson here? You never know who’s watching!

You can watch all the attempts here, if you really must!