The guys over at MakerSpaceUK have written an excellent little tutorial that will help you get started with creating your first circuit using a breadboard and some LEDs. There’s even a kit you can buy through Farnell for less than £5. It’s a nice little project that will have you programming, in Python, a traffic light sequence. Sure, it’s been done before, but it’s beautifully documented and photographed.
Ryan Walmsley’s Motor Controller Board has been given support in ScratchGPIO making it a very simple way for youngsters to get into robotics.
Although not available yet, the brilliant Simon Walters was sent a prototype board for the work and has just announced support on his blog.
Remember, this is a very cheap board that is designed to control two motors, and that’s all – it’s ideal for those just getting started with the Pi and wanting to get going on something a bit more geeky 🙂
Parent Tycen decided to solve the age-old problem of kids getting up earlier than their parents want them to. Taking inspiration from a kids’ alarm clock, Tycen took a project box, a bit of simple wiring and a Pi and made his own version. It has three lights – red for ‘don’t get up’, amber for ‘almost time’ and green for ‘okay to get up now. It’s a lovely little project, especially considering Christmas Day is coming up and that’s always the worst day of the year for kids getting up early!
Twas a slightly chilly December morning when two men from Potton, Bedfordshire, loaded up a car with an incredible number of boxes and monitors. Thus armed, they headed to the great City of Cambridge, more specifically the Institute of Astronomy. Don’t worry, that’s as flowery as this is going to get! 🙂
So, myself and Tim Richardson (@geeky_tim) arrived at the Institute around 9.30am. Signs for the Raspberry Jam were already out and we met Andy Batey (@AndyBateyPi) at the main entrance to the building. Andy has been fantastic with this and the last Jam – tirelessly working behind the scenes to get the venue sorted out and turning up at an ungodly hour to put signage up. He’s also responsible for arranging the live streaming of the event and recording all the lecture theatre sessions and posting them on YouTube!
We unpacked all the equipment and Andy, Tim and Gordon Wheeler (@GordonTGopher) started setting up the meeting room in preparation for the programming workshop for kids. This was our first workshop and it had taken an awful lot of organising! Through sponsorship from ComputerLinks (thanks Matt Manning! @RaspPiBeginners) and ADP (thanks Tim) we had managed to get 16 Pi workstations together (with 4 spare Pis in case of mishap). This gave us the ability to run enough Pis for 32 kids – two per Pi.
While the guys were busy in the meeting room, myself and some of the other “Jam Makers” (our name for people who set-up and marshal at the event – think Olympic Games Makers, but geekier) started to clear and arrange the main foyer area and mezzanine level with tables for the marketplace and show-and-tell. Our caterer (Crazy Cow Catering @crazycowcaters) arrived soon after bearing sandwiches, drinks, snacks, a monster of a microwave oven and a cake… But more on the cake later… I know, I know, the tension is palpable.
Around 10.30am, kids, parents and teachers began to arrive for registration for the workshop. Now it started to get exciting – there was a real buzz in the air. Everyone turned up who should have done (including a large party from Ivy Chimneys Primary School in Essex) and we even had a couple of extras. Soon enough, they were all in the meeting room, split up into pairs in front of a Pi and ready to rock. Alex Eames (@RasPiTV) was in charge and we had lots of helpers wandering around the room offering assistance where it was needed. Here’s a photo that I shot at the entrance to the meeting room when the workshop was well underway. Alex is sitting on the right hand side with Boris Adryan (standing, pointing). Boris had brought his kids along and was one of the workshop helpers.
The first half of the workshop was to get the kids introduced and comfortable with Scratch. They used the Getting Started worksheet from MIT and a couple of the worksheets kindly provided to us by Code Club (thanks to Laura Kirsop for sorting this out for us!). They then moved onto using Scratch with a GPIO add-on board called the Pibrella.
Around 12.15pm, people started to arrive for the afternoon session. We’d sold more tickets this time (those under 16 are given free entry – why should we charge kids for them to learn?) and we ended up with around 170 attending the Jam (including those staying from the workshop). I reckon next time we should be able to take more.
We had some great show-and-tell exhibitors:
And of course we had some excellent vendors:
We then had a couple of lightning talks. The first was from Ciseco who introduced their RasWIK (Wireless Inventors Kit) workshop:
and then we had Alex Eames (RasPi.TV) and Dave Mellor (from Cyntech) talking about the HDMIPi screen, the affordable HD screen for the Pi. We got to see the prototype screen and they revealed some of the additional features that the screen will have (including an additional HDMI input port).
Next up was Gordon Hollingworth from the Raspberry Pi Foundation. He talked about the NOOBS operating system and how it can help you install other operating systems. He also showed how you could get into the command line of NOOBS and even hot-swap SD cards to enable you to repair them. Hot-swapping SD cards – just mind-blowing in a very geeky kind of way. He also shared some exclusive pieces of news:
It’s great to get an update ‘from the horses’s mouth’ as it were.
At the same time as Gordon’s talk, Ciseco were running a hands-on workshop with the RasWIK in the meeting room. The RasWIK pairs a GPIO board with a wireless Arduino board allowing you to wirelessly, for example, take sensor readings with the Arduino and transmit them back to the Pi. The range is quite substantial, depending on sight-lines. Apparently the workshop was a great success and we’re glad we were able to facilitate it by leaving all the Pis set-up from the morning session.
We then had a break from presentations, giving everyone the chance to look around the marketplace and show-and-tell. We also had another session in the meeting room. Jim Darby ran a special session for those people who had just got a Pi and wanted to know how to set it up and get started doing something useful. It was quite popular and it’s something we’ll probably do next time as well for anyone who got a Pi at Christmas, for example.
After the break, our next presentation was from Carrie Anne Philbin. Carrie Anne runs a YouTube channel called Geek Gurl Diaries. She is also the author of a fantastic new book for the Pi called “Adventures in Raspberry Pi“. Later on, she did a book signing! But back to the presentation. Carrie Anne has been developing a new package of work for schools based around Sonic Pi. Sonic Pi is a rudimentary programming language developed by Sam Aaron (based on Ruby) that allows you to create sound sequences quickly and easily. At the next Jam, Carrie Anne will be leading the kids programming workshop using Sonic Pi, which is exciting. Anyway, here’s her presentation. Apologies if the sound is a bit quiet, I was a doofus and forgot to wire her up for sound. Of particular note is the reception Carrie Anne received at her first Jam – apparently sexism is not dead in the world of computer science. This needs to change.
Next up was Ryan Walmsley from Ryanteck. He’s a 17-year old who has just set-up his own business. He presented his first product – a budget motor controller board able to control 2 DC motors. It’s a lovely board as it has been designed to do one thing, and do it well.
At the same time as Ryan’s talk, Jamie from The Pi Hut ran a workshop on setting up wi-fi on the Pi.
We then had another break to mingle, shop and look at show-and-tell.
We also had a moment for Crazy Cow Catering to unveil her masterpiece – a Raspberry Pi logo-shaped cake. It was awesome. Here’s Tim doing the ceremonial cutting-of-the-cake:
It was around this time that we realised that no-one was running one of the workshops coming up in the meeting room, so I was nominated! Fortunately, it was “Hands on with the Pibrella” so I ran the Scratch workshop from the morning using the same worksheet.
Next up in the lecture theatre was Phil Howard (@gadgetoid) who gave a talk on the Pico Piduino, an Arduino-compatible breadboard project. It turned into more of a discussion about various types of Arduinos and the benefits thereof.
At the same time, Nevil Hunt from Innovations in Education gave a hands-on demo of the Seven Segments of Pi. This is a lovely little board which is comprised of a large (and I mean large) seven-segment display and a button.
It’s a great educational tool as it has the two things you need for games creation – a controller (the button) and a display (the seven-segments). There’s a website that tells you more about it here.
After the talk in the lecture theatre, myself and Tim held a discussion about the future of the Cam Jams. A lot of different things came up including feedback on the current Jam and ideas for the future. If you’re interested, the discussion was videoed and can be viewed below:
And that was it for what me and Tim call CamJam 4! Except for clean-up and get-out, of course. It takes a lot of people to set-up a Jam but it also takes a lot of manpower to clear up again afterwards and return the Institute to the state it was in before we invaded. Thanks to everyone who stayed behind and helped – it cut our clean-up time down from an hour at the last Jam to half an hour at this one (and we had more equipment to pack up this time!)
As is customary for Raspberry Jams in general, we sent a feedback questionnaire out after the Jam. We received 43 responses (representing about 60 people – a lot of people responded for groups) and we got some great feedback, both positive and negative. It’ll really help us to plan the upcoming Jams.
Speaking of which, the next Jam will take place at the Institute of Astronomy on the 8th February. Myself and Tim look forward to welcoming some of you to the event!
Credits
Some of the photos (especially those from the show-and-tell) were taken by Darren Christie (thank you!!!)
Vince has taken a Pi, some LED matrix displays, a 7-segment display and a Wii nunchuck and put them together to create a Tetris-like game. The game is controlled by the accelerometer in the nunchuck, rather than the joystick, so control is a little tricky. Looks like a nice project though!
Matt, over at Raspberry Pi Spy, has taken an old Holux GPS module and hooked it up to his Pi using bluetooth.
