Eduardo Zola and Perla Zola have taken a Raspberry Pi, created a wooden case for it and added an ‘all seeing eye’ and made a HAL9000 replica. It’s a lovely build which you can see a tour of by…
Category: Cases
Another cool #RaspberryPi Gameboy mod
Raspberry Pi Forum user Microbyte has taken an old Gameboy and squeezed a Raspberry Pi and a composite screen in to create a handheld retro gaming machine. I know this has been done before, but this is a neat build…
Compare #RaspberryPi cases with The Pi Hut
This hasn’t got anything to do with the sponsorship at the top of the page – just something I thought was cool and that I wanted to share with you. There are an awful lot of cases out there now,…
Novelty radio becomes working computer with a #RaspberryPi
“Strider19” had an old novelty radio shaped like a computer. He dug out a ruler, measured it and worked out that he could fit a Raspberry Pi into the case. He grabbed a small composite monitor off Amazon to use as…
More #RaspberryPi B+ coverage
Gordon Henderson (@drogon) has got his B+ and has done a nice look at it on his blog, including the first ‘in the wild’ photo I’ve seen of the new B+ Pibow Coupe (see above). Also on his blog he’s…
New products for the #RaspberryPi B+ starting to appear
Apart from the previously mentioned cases, some more B+ centric products are starting to appear. Over on the Cyntech shop, they’ve got the following: 40-way ribbon cables of various designs (1 2 3) 40-way paddle connector board 40-way GPIO Cobbler…
More on the #RaspberryPi B+
Russell Barnes has scored a scoop by interviewing Eben Upton about the brand new Model B+ and has produced a special podcast. You can listen to the podcast by going to the raspi.today site now and listen to Eben talk about…
Build a Gameboy… sort of… with your #RaspberryPi
This is one of the more beautiful projects I’ve seen, just for pure retro quality. Noe Ruiz has written up the project over at Adafruit. Using a Pi, a PiTFT and a 3D printer, along with a few other bits…
#RaspberryPi meets 1942 Crosley Radio
Andy Felong took a Raspberry Pi, a case for an old radio, an amplifier and an LCD plus driver board and created a media centre. He’s given a few more details on his blog and, if you post in the…
Short Crust case for the #RaspberryPi – review
The Average Man got sent a Short Crust case by Pi Supply and has given it a very positive review over on his site. Read the review here.