Janos Kiss, Otília Pasaréti and Romain Fontaine set up a pinball manufacturing company, called Team Pinball, in Cardiff a little over a year ago and have been quietly, and secretly, beavering away on their new machines. The game, based on…
James West has taken an old rotary-style telephone and turned it into a Pi-powered jukebox. To start with, he hooked the dialer up to the Raspberry Pi’s GPIO and then used Dan Aldred’s code to count the pulses generated when the…
Scott Baker has a vintage computing habit! For his latest project, he wanted to solve the issue of transferring files between a PC/XT and a modern desktop. To do this, he created an ISA card PCB (seen above) which takes…
The MagPi issue 67 is out and is a retro computing special covering: Hardware emulation and classic coding The best emulators for Raspberry Pi Using a Retro Computer The best retro computer community builds There’s also plenty of features on…
Zach Levine has taken an annoying toy (a Furby) and stuffed it with a Raspberry Pi Zero W, a Pimoroni Speaker pHAT and a stepper motor driver board. He has then installed the Amazon Alexa software on the Pi and programmed…
Emanuele Coletta and friends have created a physical representation of a Pac Man game. The game characters were 3D printed and the ‘pills’ collected by Pac Man were changed to LEDs which disappear as the character rolls over them. The friends,…
Rene Richarz has written a great guide on installing RetroPie on top of pi-topOS on your pi-top or pi-topCEED. He goes through removing part of the pi-topOS and then installing RetroPie, giving all the necessary command line instructions to set-up…
Happy New Year everybody! The owner of FacelessTech wanted a small retro gaming console so he turned to the Raspberry Pi Zero. He designed a custom circuit board to house the control buttons, taking inspiration from Wonky Resistor’s ScoreZero. He…
Matt Hawkins has taken a reclaimed IKEA Gulliver table, added an old VGA monitor and loads of arcade buttons and created himself a Raspberry Pi-powered arcade console. He’s written the whole thing up over on his blog, Raspberry Pi Spy,…
Ryan Walmsley has taken an old claw machine and retro-fitted a Raspberry Pi to control it. A custom controller board (pictured below) gives him 2 dual H-bridges to drive the three motors on the X, Y and Z axis and some…
