Brook Drumm has created a robot that will crawl along a string or fishing line above a room or area and take photographs and video. It uses some 3D printed parts and a few servos and is, of course, run…
Category: 3D printing
Build your own Raspberry Pi laptop for around $150
Raspberry Pi laptops are somewhat of a holy grail for Pi users. You can, of course, just buy a Pi Top and build it from their kit. Or, alternatively you could go the DIY route as Instructables user Prosnow22 has done.…
Miniaturised gaming console with a Raspberry Pi inside is a thing of beauty
DaftMike has created a miniaturised version of the classic NES (Nintendo Entertainment System) and used a Raspberry Pi to play retro games. At 40% of the original size, this is a lovely small build accomplished using a 3D printer. He…
Get closer to science with this Raspberry Pi-controlled microscope
Andre Maia Chagas and his team, comprised of LL Prieto Godino, A Arrenberg and T Baden, have developed a Raspberry Pi-controlled microscope called FlyPi and entered it into the Hackaday Prize competition. Here’s what Andre has to say about the project: Our plan with this…
Raspberry Pi Compute Module-powered CubeSat mock-up used in classrooms
NASA has taken the Raspberry Pi Compute Module, developed their own host board, added a few other components, and created the Pi-Sat (the innards of which are displayed in the picture above). The Pi-Sat is being used in classrooms to…
Build a wearable time-lapse camera with a Raspberry Pi Zero
Adafruit has published a tutorial on creating a time-lapse camera using a Pi Zero, a camera module, a bit of power circuitry, a micro button and a 3D-printed case. Lovely project if you’ve got the 3D printing capability. Take a…
International background radiation research project uses Raspberry Pi
A group of UC Berkeley students working with researchers at the Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) have developed devices that will measure and report levels of background radiation. Called DoseNet, the open-source project aims to get…
Cambridge start-up uses Raspberry Pi for low-cost water quality scanner
Waterscope, a Cambridge start-up company, has developed a low-cost, 3D-printed water quality scanner based around a Raspberry Pi and a microscope. Alex Patto, Richard Bowman, Nalin Patel and Tianheng Xhao met on iTeams, a programme started at Cambridge University which aims to help…
String Art machine creates beautiful masterpieces with a Raspberry Pi
London-based Laarco have developed a machine to create large works of art using a technique known as “String Art”. This technique uses thousands of nails and a single piece of string to construct a ‘painting’ of a subject. Laarco’s machine, called…
3D-printed flight case for the Raspberry Pi and SenseHAT / AstroPi
Les Pounder has been rummaging around in the CPC warehouse for components to populate a 3D-printed AstroPi flight case. So, far he’s found some cost effective buttons to poke out the top. The 3D-printed case came from RyanTeck. Ryan offers…