Connor Yamada has done a nice write-up of his project to create an ‘action camera’ with his Raspberry Pi and Camera Module. The results are mixed, to say the least, but it does show what is possible with a bit…
Category: 3D printing
Make your own Raspberry Pi-powered drum kit
Carmelito Andrade has written an excellent tutorial in which he uses the Adafruit Capacitive Touch HAT together with a Raspberry Pi Model A+ and some 3D-printed bits to create a Pi-powered drum kit. Read it here.
Make your own Raspberry Pi powered mobile phone
Tyler Spadgenske has written an Instructable that shows you how to create your own mobile phone using a Raspberry Pi A+. He 3D-prints a case for the phone and then fills that case with components including an Adafruit FONA board (which…
3D printed Spotify bear runs from a Raspberry Pi
Andreas Lindahl has 3D-printed a lovely bear and put it together with a Pi and some other components to create a cuddly Spotify player. Created as a way to get better at 3D modelling and printing, the bear has a…
Flash flood predictions with Raspberry Pi weather stations
The United States Agency for International Development (USAID) and the National Oceanic and Atmospheric Administration have teamed up with other international partners to develop 3D-printed weather stations that will help to predict flash floods in underdeveloped countries, and they use the…
Portable Raspberry Pi using a 3D printed case
Jonathan has written an Instructable tutorial to create a portable Raspberry Pi. It uses one of the popular car reversing screens and a 3D printed case. Read it here.
Raspberry Pi brings to life Adventure Time console BMO
Well-loved cartoon series Adventure Time has been used as the basis for a Raspberry Pi project. Mike Barretta 3D printed the case for the unit, which has a Pi inside, and has loaded it up with all kinds of retro gaming…
Pi-Top, the Raspberry Pi laptop, version 3 revealed
Ryan Dunwoody and Jesse Lozano, the creators of the Pi-Top laptop, have unveiled the latest version of their machine. It is much thinner and features a larger trackpad and specially designed cantilevered trackpad buttons. I saw the version just before this…
Water cooling the Raspberry Pi
This one is roughly in the category of “Why would you do that?” but Unprecedented has gone ahead and done it anyway. He’s taken a few 3D printed parts and some tubing and created a water cooling system for the Raspberry Pi. You can…
Build a Raspberry Pi-powered arcade cabinet
Instructables user diygizmo has posted a great tutorial to help you build the arcade cabinet in the picture above. Check it out here.